Debian install to Sodia board from Macnica

Debian install to Sodia board from Macnica

Prepare SD card image according to this page and then write it to SD Card using Linux dd command or image writer software on Windows.  The SD Card image was created only 2GB disk usage (1.5GB Linux partition) that is insufficient for install debugging environment.  This article is a log that expand Linux partition after create SD Card image.  (This can be done by delete and re-create Linux partition that started exactry same start offset to end of physical SD Card.  This means Linux root partition should be located at the end of all other partitions, otherwise destroy boot image).

root@sodia:~# fdisk /dev/mmcblk0
Command (m for help): p

Device         Boot   Start     End Sectors  Size Id Type
/dev/mmcblk0p1         4096 1052671 1048576  512M  b W95 FAT32
/dev/mmcblk0p2      1052672 4194303 3141632  1.5G 83 Linux
/dev/mmcblk0p3         2048    4095    2048    1M a2 unknown

Partition table entries are not in disk order.

Command (m for help): d
Partition number (1-3, default 3): 2

Command (m for help): n
Select (default p): p
Partition number (2,4, default 2): 
First sector (1052672-15677439, default 1052672): 
Last sector, +sectors or +size{K,M,G,T,P} (1052672-15677439, default 15677439): 

Created a new partition 2 of type 'Linux' and of size 7 GiB.

Command (m for help): w
sudo reboot

And after reboot;

sudo resize2fs /dev/mmcblk0p2

User login